Home > Browse Products > Warewashing > Sinks, Dishtables
Sinks, Dishtables
Sort By:
Page of 7
7-PS-23 7-PS-51 EUB2S36-1RD
Hand Sink, wall mounted, 9" wide x 9" front-to-back x 5" deep bowl, 20 gauge 304 stainless steel, splash mounted faucet, drain with strainer plate & 1-1/2" IPS connection, NSF, cCSAus Hand Sink, wall mounted, 14" wide x 10" front-to-back x 5" deep bowl, 20 gauge 304 stainless steel, electronic faucet (battery & 110v options both supplied), lever drain with overflow, P-trap, wall bracket, NSF, cCSAus Underbar Sink Unit, two compartment, 36"W x 21-1/4"D x 33-1/2"H, 18/300 series stainless steel construction, 10" wide x 14" front-to-back x 10" deep fabricated bowls, 12" ribbed drainboard on right, 4"H backsplash, 4" O.C. deck mount faucet (PBF-4-D-10), raised marine edge on front & sides, stainless steel apron on front & sides, includes 1-1/2" drains & overflow stand pipes (PB-OVF-BS), stainless steel legs & side bracing, adjustable plastic bullet feet, NSF, CSA-Sanitation (weights are subject to additional packaging)
1B16204-1D18L 1B16204-1D18R 1B18244-1D18R
Sink, (1) 16"W x 20" front to back x 14" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 16"W x 20" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
1B18244-1D24R 2B16204-1D18R 2B184-1D18L
Sink, (1) 18"W x 24" front to back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF "B" Series Sink, 2-compartment, 54"W x 25-1/2"D, 16/300 stainless steel construction, 16" side-to-side x 20" front-to-back x 14" deep bowls, (1) 18" drainboard on right, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA "B" Series Sink, 2-compartment, 58"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (1) 18" drainboard on left, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA
2B184-2D18 3B16204-1D18R 3B18244-2D18
"B" Series Sink, 2-compartment, 75"W x 23-1/2"D, 16/300 stainless steel construction, 18" side-to-side x 18" front-to-back x 14" deep bowls, (2) 18" drainboards, 10"H boxed backsplash, 8" O.C. splash mount faucet holes, 3-1/2" diameter die-stamped drain openings, stainless steel gussets, legs, crossbracing, & adjustable bullet feet, NSF, CSA Sink, (3) 16"W x 20" front to back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
3B184-1D18R 3B184-2D18 3B244-1D24L
Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 18"W x 18" front-to-back x 14" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF Sink, (3) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (2) sets of faucet holes, 16/300 stainless steel, 1-5/8" OD stainless steel legs with 1-1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF
E1S8-1620-12L18 E1S8-18-12L18 E1S8-18-12R18
E-Series Compartment Sink, (1) 16"W x 20" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation E-Series Compartment Sink, (1) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation
E1S8-1824-14 E1S8-1824-14R24 E1S8-24-14L24
E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14"deep compartments, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation E-Series Compartment Sink, (1) 18"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation E-Series Compartment Sink, (1) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" left drainboard, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2 dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA-Sanitation
E2S8-18-12R18 E2S8-18-12T18 E2S8-24-14R24
E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (1) 18" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 18"W x 18" front-to-back x 12" deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF E-Series Compartment Sink, (2) 24"W x 24" front-to-back x 14" deep compartments, (1) 24" right drainboard, 10"H boxed backsplash with 2" return at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowls drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF
E3S8-1014-10T15 E3S8-1824-14T24 HS-1317
E-Series Compartment Sink, (3) 10"W x 14" front-to-back x 10" deep compartments, (2) 15" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA E-Series Compartment Sink, (3) 18"W x 24" front-to-back x 14" deep compartments, (2) 24" drainboards, 10"H boxed backsplash with 2" return to wall at 45° & 1" tile edge, corners coved at 3/4" radius, bottom of bowl drain to 3-1/2" dia. die stamped opening, (1) set of faucet holes, 18/300 stainless steel, 1-5/8" OD galvanized legs & gussets, adjustable plastic bullet feet, NSF, CSA Drop-In Hand Sink, one compartment, 13"W x 17"D x  5-1/2"H O.A., 10" wide x 12" front-to-back x 5-1/2" deep compartment, 4" O.C. deck mount faucet gooseneck with gooseneck spout (low lead compliant), 1-1/2" drain, stainless steel construction, NSF (11-5/8"W x 15-5/8"D cut-out required)
HS-2-LS HS-7 HS-9L
Hand Sink, wall mount, 15-3/4"W x 15-1/4"D x 13-3/8"H O.A., 7-3/4"H backsplash, 12-1/2" wide x 9-3/4" front-to-back x 5-5/8" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), side splash on left, includes mounting bracket, stainless steel construction, NSF Hand Sink, wall mount, 16"W x 15"D x 29"H O.A., 14" wide x 10" front-to-back x 6" deep bowl, 4" O.C. splash mount faucet with swing spout (low lead compliant), soap & towel dispenser, stainless steel side support brackets, P-trap, includes mounting bracket, stainless steel construction, NSF Space Saver Hand Sink, wall mount, 12"W x 17"D x 12"H O.A., 8"H backsplash, 9-3/4" wide x 11-3/4" front-to-back x 5" deep bowl, 4" O.C. splash mount gooseneck faucet (low lead compliant), includes mounting bracket, stainless steel construction, NSF